Publication list in Q1 Journals

1-Jun 2019 Smart Materials and Structures Micropatterned flexible strain gauge sensor based on wet electrospun polyurethane/PEDOT: PSS nanofibers

2-2018 Materials Science and Engineering A-structural Materials Properties Microstructure and Processing Ductility and formability of three high-Mn TWIP steels in quasi-static and high-speed tensile and Erichsen tests (vol 712, pg 255, 2018)

3- Jul 2017 Precision Engineering Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics

4- May 2016 Ceramics International Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test

5- Jan 2016 Materials & Design Severe plastic deformation of tubular AA 6061 via equal channel angular pressing

6- Dec 2015 Plos One Investigation of Embedded Si/C System Exposed to a Hybrid Reaction of Centrifugal-Assisted Thermite Method

7-Dec 2015 Materials & Design The application of equal channel angular pressing to join dissimilar metals, aluminium alloy and steel, using an Ag–Cu–Sn interlayer

8- Jun 2015 Plos One Mechanical and Chemical Characterization of a TiC/C System Synthesized Using a Focus Plasma Arc

9- Apr 2015 Plos One Optimal Placement of Unified Power Flow Controllers to Improve Dynamic Voltage Stability Using Power System Variable Based Voltage Stability Indices

10- Apr 2015 Metallurgical and Materials Transactions A Erratum to: Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

11-Sep 2015 Surface and Coatings Technology Identification of critical load for scratch adhesion strength of nitride-based thin films using wavelet analysis and a proposed analytical model

12- Feb 2015 Metallurgical and Materials Transactions A Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

13- Feb 2015 Materials & Design Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al–Mg–Cr–Mn (AA 5052-O) alloy

14- Feb 2015 Materials & Design Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing

15-2015 IEEE Transactions on Industrial Informatics A Contrast Adjustment Thresholding Method for Surface Defect Detection Based on Mesoscopy

16-Jan 2014 Scientific Reports Modified smoothed particle hydrodynamics (MSPH) for the analysis of centrifugally assisted TiC-Fe-Al2O3 combustion synthesis

17-Jan 2014 Materials & Design Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification

18-Mar 2014 Composites Part B: Engineering In situ TiC–Fe–Al2O3–TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis

19-Dec 2013 Plos One An Inverse Finite Element Method for Determining the Tissue Compressibility of Human Left Ventricular Wall during the Cardiac Cycle

20-Dec 2013 Ceramics International Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite

21-Sep 2013 IET Power Electronics Novel three-phase asymmetrical cascaded multilevel voltage source inverter

22-Sep 2013 Journal of Materials Processing Technology End formation of a round tube into a square section having small corner radii

23-Sep 2013 Journal of the Mechanical Behavior of Biomedical Materials Nanocrystalline forsterite for biomedical applications: Synthesis, microstructure and mechanical properties

24- Jul 2013 Composites Part B: Engineering A novel fabrication method for TiC–Al2O3–Fe functional material under centrifugal acceleration

25-Jan 2013 Ceramics International Sintering properties of hydroxyapatite powders prepared using different methods

26- Aug 2012 Polymer Evaluation of the material constants of nitrile butadiene rubbers (NBRs) with different carbon black loading (CB): FE-simulation and experimental

27- Aug 2012 Materials & Design A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels

28- Dec 2012 Materials & Design Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet

29- Jan 2012 Journal of the Mechanical Behavior of Biomedical Materials The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a Guinea pig heart

30- Jan 2012 Journal of Materials Processing Technology A developed process for deep drawing of metal foil square cups

31- Aug 2009 International Journal of Machine Tools and Manufacture Development of a new process for producing deep square cups through conical dies

32- Nov 2006 Vacuum Compound two-dimensional thermo-elastic and thermodynamic analysis for c-axis-oriented epitaxial lead titanate thin films

33- Feb 2005 Journal of Materials Processing Technology A novel process on friction aided deep drawing using tapered blank holder divided into four segments

34- Aug 2003 Journal of Materials Processing Technology A novel technique of friction aided deep drawing using a blank-holder divided into four segments

35- May 2003 International Journal of Machine Tools and Manufacture Friction aided deep drawing using newly developed blank-holder divided into eight segments

36- Apr 2002 International Journal of Machine Tools and Manufacture Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 1: experimental observations on the deep drawing of aluminium thin sheets and foils

37- Apr 2002 International Journal of Machine Tools and Manufacture Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 2: analysis of the drawing mechanism and process parameters

Publication List in Q2-Journals

38-May 2019 Journal of Thermoplastic Composite Materials Effect of carbon black loading on mechanical and rheological properties of natural rubber/styrene-butadiene rubber/nitrile butadiene rubber blends

39- 2019 Materials Research Express Manufacturing of porous aluminum 2024 alloy samples with impressive compression properties

40- Apr 2018 Applied Mathematical Modelling Numerical simulation of metal removal in laser drilling using meshless local Petrov–Galerkin collocation method

41- 2017 The International Journal of Advanced Manufacturing Technology A study on the different finite element approaches for laser cutting of aluminum alloy sheet

42- 2017 Engineering Analysis with Boundary Elements Numerical simulation of metal removal in laser drilling using radial point interpolation method

43- Sep 2016 Computer Applications in Engineering Education A PC-based simulation platform for a quadcopter system with self-tuning fuzzy PID controllers

44- May 2016 Measurement Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel

45- 2016 Materials and Manufacturing Processes A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining

46- 2016 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Novel uses of SiO 2 nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data

47- Aug 2015 Frontiers of Information Technology & Electronic Engineering Enhancing power transfer capability through flexible AC transmission system devices: a review

48- Mar 2015 International Journal of Materials Research (formerly Zeitschrift Fuer Metallkunde) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy

49-2015 International Journal of Control, Automation and Systems Fuzzy Swinging-up with Sliding Mode Control for Third Order Cart-Inverted Pendulum System

50-Oct 2015 Ceramic Engineering and Science Proceedings Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique

51-Nov 2014 Journal of Zhejiang University SCIENCE A Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension 反复张力下V 形切口圆条的表面裂纹的疲劳扩展

52-Oct 2014 Acta Astronautica An empirical modified fatigue damage model for impacted GFRP laminates

53-May 2014 Combustion Science and Technology Study of Ti+C Combustion Synthesis Reaction in a Controlled Declining Temperature State

54-2014 Advances in Materials Science and Engineering Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill

55-2013 Journal of Ceramic Processing Research Properties of hydroxyapatite synthesize by wet chemical method

56-2013 JOM The Effects of an Unexpected Ceramic Coating Phase at the Head of a Pipe on Joining and Postprocessing of a Ceramic-Lined Composite Pipe

57-2013 Advanced Materials Research Characterization of Forsterite Bioceramics

58- 2013 Journal of Ceramic Processing Research Densification behavior of Y-TZP containing zirconium diboride composites

59- 2013 International Journal of Surface Science and Engineering A developed friction test for sheet metal stretch forming processes

60-Jan 2013 Applied Mathematics & Information Sciences Decoupled Third-order Fuzzy Sliding Model Control For Cart-Inverted Pendulum System

61-Jan 2013 Applied Mathematics & Information Sciences Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm

62-Dec 2012 Engineering Failure Analysis High operating steam pressure and localized overheating of a primary superheater tube

63- Mar 2011 Journal of Materials Research Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates,/p>

Publication List in Q3-Journals

64- Oct 2018 Key Engineering Materials Ballistic Impact Simulation of Proposed Bullet Proof Vest Made of TWIP Steel, Water and Polymer Sandwich Composite Using FE-SPH Coupled Technique

65- Sep 2018 Key Engineering Materials Effect of the Cyclic Extrusion and Compression Processing on Microstructure and Mechanical Properties of Al-1%Cu Alloy

66- Feb 2018 International Journal of Computational Physics Series Dynamic energy absorption of ultrafine-grained TWIP steel under axial impact loading

67- Feb 2018 International Journal of Computational Physics Series Severe plastic deformation of Al-1%Cu Alloy processed by a Simple Cyclic Extrusion Compression technique

68- 2018 International Journal of Management Science and Engineering Management Optimization of reliability based model for production inventory system 68- 2017 International Journal of Materials Forming and Machining Processes Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder

69- 2017 OPSEARCH A surface response optimization model for EPQ system with imperfect production process under rework and shortage

70-Jan 2015 Applied Mathematics & Information Sciences Modeling the Effects of Myocardial Fiber Architecture and Material Properties on the Left Ventricle Mechanics during Rapid Filling Phase

71-2014 Procedia Engineering Influence of Temper Rolling on Tensile Property of Low Carbon Steel Sheets by Application of Hill 48 Anisotropic Yield Criterion

72-Jan 2013 Materials Science Forum Influence of Sintering Process on the Mechanical Properties of Dental Zirconia Ceramics

73-2011 Engineering Letters High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction

74- 2005 Micro Total Analysis Systems 2004, Vol 1 A novel micro device for measuring the electyromechanical properties of a single myocyte

75- 2001 Simulation of Materials Processing: Theory, Methods and Applications A fuzzy model for prediction of material flow-stress in metal forming

[1] S. A Fadhil, AH Alrawi, JH Azeez, MA Hassan: A new multiscale model to describe a modified Hall-Petch relation at different scales for nano and micro materials, AIP Conference Proceedings 1948 (1), (2018). [2] J Gadelhaq, M., Hamada, A., Hassan, M., & Kömi: Dynamic energy absorption of ultrafine-grained TWIP steel under axial impact loading, International conference on computational materials science and thermodynamic systems (CMST 2018), 22-23 March, Wolfson College, Cambridge City, University of Cambridge UK. 2018. [3] Amir A. Abdelsalam, Sherif Araby, M. A. Hassan and A. A. El-Moneim: Constitutive modelling of elastomer/graphene platelet nanocomposites, International Conference on Materials and Intelligent Manufacturing (ICMIM 2017), 21-23 August 2017, National University of Singapore (NUS), Singapore. [4] A Shaker, Ahmed H Hassanin, NM Shaalan, MA Hassan, Ahmed Abd El-Moneim: A novel technique for producing conductive polyurethane nanofibrous membrane for flexible electronics applications, International Conference on Materials and Intelligent Manufacturing (ICMIM 2017), 21-23 August 2017, National University of Singapore (NUS), Singapore. [5] Fadi, Shameen Ahmed, M. Saad, H. Hazli, M. A. Hassan, Power Quality Improvement in Transmission Network using Fuzzy Logic based Unified Power Flow Controller, 2015 IEEE International Conference, 17 March 2015, Spain. [6] Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique R Mahmoodian, M Hamdi, M.A.Hassan, 39th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2015), Florida, UAS, 25 January 2015. [7] MA Hassan, IM Hassab-Allah, LMA Hezam, NA Mardi, M Hamdi, Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder, The World Conference on Engineering, WCE2105, July 1-3, 2015. [8] M. A. Hassan, Mohammed Elfiky , Y.Nukman1, Reza Mahmoodian, “Monte Carlo Simulation Model for Magnetron Sputtering Deposition”, The 3rd International Conference on Nanostructures, Nanomaterials and Nano-engineering (ICNNN 2014) Hong Kong, December 26-28, 2014. [9] A M Sifullah, Y Nukman, and M A Hassan , “3D FEM Simulation to Predict the Heat Affected Zone during Laser Machining on Stainless Steel 304”, International Conference on Mechatronics and Production Processes (ICMPP’2015) April 24-25, (2015) Pattaya (Thailand) [10] A. Hossain1, Y. Nukman, M. A. Hassan, “Modelling of material removal by using adaptive neuro fuzzy inference system in laser machining”, International Conference on Innovation in Science and Technology, (lICIST 2015), 20 April 2015, Kuala Lumpur, Malaysia. [11] Javarul D., M. A. Hassan, A. Mardi, Z. Erfan, Influence of temper rolling on tensile property of low carbon steel sheets by application of Hill 48 anisotropic yield criterion, ICTP 2014, Nagoya, Japan. 19-24 October 2014, DOI:10.1016/j.proeng.2014.10.101. [12] Moe Win, A.R. Bushroa, M.A. Hassan, Hilman Nordin, Development of Mesoscopic Analytical Imaging System For Deposited Surface Inspection, Conference: AUN/SEED-NET Regional Conference on Materials Engineering,, At Kuala Lumpur, Malaysia, 11 November , 2014. [13] M. A. Hassan, L. M. Hezam, M. G. Elsebaei, J. Purbolaksono, Deep drawing characteristics of square cups through conical dies, ICTP 2014, Nagoya, Japan, 19-24 October 2014, DOI:10.1016/j.proeng.2014.10.091. [14] Mirhassani S. M., Ahmadian J., Ghorbanian M. J., Hassan M. A., Stability of geostationary flying satellite under combined sliding mode and PID control, Conference Proceeding: IEEE Business Engineering and Industrial Applications Colloquium, BEIAC, 7-9 April 2013, Langkawi, Malaysia. [15] S. M.Mirhassani, J. Ahmadian, M. J. Ghorbanian, M. A. Hassan; Conference Proceedings: Sliding mode and PID controller in geostationary satellite attitude control, Asia-Oceania Top University League on Engineering, AOTULE’12, 23-24 November 2012, Kuala Lumpur, Malaysia. [16] FadiAlbatish, SaadMekhelif, HazlieMokhlis, Mohsen Hassan,” D - Q model of Fuzzy based UPFC to control power flow in transmission network", Proceedings of the 7th IET international conference on Power Electronics, Machines and Drives,PEMD2014, 8-10 April 2014, Manchester, UK [17] Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A., "(MQL) Lubrication for Better Surface Quality and More Safe Environments in End-Milling " International Symposium on Green Manufacturing and Applications (ISGMA 2013) on June 25~29, 2013, Ohau, Hawaii, USA. [18] Raza Moshwan, Farazila Yusof , M. A. Hassan, Finite element simulation of residual stresses in friction stir welded AA 5052 aluminum alloy plates, Conference: ADVANCED MATERIALS CONFERENCE (AMC 2014), Nov 26, 2014, Langkawi, Malaysia. [19] Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A, “Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling" , 4th International Conference on Material and Manufacturing Technology (ICMMT 2013), 11-12 May 2013, Seoul, Korea. [20] M. A. Hassan, M. Hamdi, S. Naderi, F. Zahedi, Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Proceeding of the 2nd International Conference on Key Engineering Materials ICKEM (2012), Feb 26, 2012, Singapore. [21] M. A. Hassan, Ahmed A. D. Sarhan, A. Amano: Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart Proceedings of the 2011 International Conference on Mechanical engineering, ICME 11, London, July 6-8, 2011, UK. [22] Ahmed A. D. Sarhan, M. A. Hassan, M. A. Hamdi: Compensation of machine Tool Spindle Error Motions in the Radial Direction for Accurate Monitoring of Cutting Forces Utilizing Sensitive Displacement Sensors, Proceedings of the 2011 International Conference of Manufacturing Engineering and Engineering, ICMEEM 11, London, July 6-8, 2011 UK. [23] H. Kotera, N .Fujiwara, M. A. Hassan, et al: Multi-functional cell mapping device, Proceedings of the 4th Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP4, Assiut, December12-14, 2006, Egypt. [24] M. A. Hassan and K. Kotera : A novel micro-device for measuring the electromechanical properties of a single myocyte; Proceeding of the 2nd International Symposium on Development of Mechatronics Education, Luxor, Feb. 13-14, (2006) Egypt. [25] M. A. Hassan, Measuring the nonlinear elastic and viscoelastic passive properties of left ventricular myocytes from Guinea big, 2nd Kyoto University international Symposium of Leading project for bio-simulation, Kyoto, November 26-27, 2004 Japan, Poster [26] M. A. Hassan and A. Amano : Study of the effective boundary conditions in finite element simulation of the heart mechanics, 2nd Kyoto University international Symposium of Leading project for bio-simulation, Kyoto, November26-27, (2004) Japan. Poster [27] M. A. Hassan and S. Ishikawa :Boundary conditions and residual strains in heart FE-simulations, 1st Kyoto University international Symposium on the heart simulation, Kyoto, February 27-28, 2004 Japan. [28] MA Hassan, K, Yamaguchi, N Takakura: A Novel technique on friction aided deep drawing using blank holder divided into four segments, Proceedings of the Ninth International Manufacturing Conference in China IMCC'2000, 16-17 August 2000, Hong Kong.

1- From September. 2003 to Sept. 2005, I was invited research scholar at the micro-engineering department, nano-metrics laboratory of the Kyoto University on the capacity of the “Japan International Leading Project for Bio-simulation”. 25 million USD, My main task was focusing on design and fabrication of a micro senor for measuring the electromechanical properties of a single heart cell. Also another task was finite element formulation and programming of the excitation propagation in heart muscles.

2- Numerical simulations and experimental investigations on the multi-axial fatigue and cyclic plastic response of the newly developed aluminium alloy and FGM for aerospace structures, Co-Investigator, 2012-2015, HIR, 600000 USD

3- Bovine Hydroxyapatite Derived Porous Bone Graft For Biomedical Application, Co-Investigator, 2012-2015, HIR, 60000 USD.

4- Development of a Powder Based Target PVD Machine, Co-Investigator, 2012-2013, Geran Penyelidikan Universiti Malaya (UMRG), National, 80000 USD.

5- Mechanical Behaviour of Bovine Hydrxyapitite Derived Porous Bone Graft for Biomedical Applications, -, 2012-2012, Postgraduate Research Grant(PPP), National , 8000 USD.

6- Principle investigator, Nonlinear Fuzzy controller design for a real cart Inverted pendulum system, UM, RG118/11AET (2012/2014 completed), 20000 USD .

7- DEEP DRAWING OF RECTANGULAR CUPS USING ELLIPTICAL CONICAL DIE, Principal Investigator(PI), 01/12/2013, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 30/11/2014, 20000 USD

8- Design and development of numerical and analytical methods, Principal Investigator(PI), 01/06/2013, Geran Penyelidikan Universiti Malaya (UMRG) - AET (Innovative Technology (ITRC)), 31/05/2014, 30000 USD.

9- Nonlinear Fuzzy Controller Design for a Real Cart Inverted Pendulum system, Principal Investigator(PI), 2011-2012, Geran Penyelidikan Universiti Malaya (UMRG), National 20000 USD

10- A Study on Low Power CO2 Laser Welding, Co-Investigator, 2011-2013, Fundamental Research Grant Scheme (FRGS), National , 30000 USD

11- Visual inspection of remote oil tanks and pipes using drone technology, Jan 2015- June 2015, BUDIMAN inspection SDN BHD, Private company 4500 USD.

Development and production of ultra-high strength Composite-Based Sandwich structure steel/polymer for automotive application, Science and Technology Development Fund (STDF), (National Challenges Projects (STDF - NCP)) Grant, Project-ID : (33397), Co-PI, The project's Budget is 2,014,000 L.E. (2 Millions and 14 thousands L.E.). 2019-2021

1- M. A. E. Saleh and M. A. Hassan. (2004): Wrinkling inclusion into thin flat sheets; A proposed method for enhancing strength, Journal of Engineering Science (JES), Assiut University, Vol. 32(3) pp.1183-1197.

2- M. A. Hassan.(2007): Calibrating the Nonlinear elastic and viscoelastic tissue properties of ventricular myocytes from guinea pig heart, Journal of Engineering Science(JES), Assiut University, Vol 35-No 2 pp. 421-442.

3- M.A. Hassan, M. A. EL-Sharief and A. Aboul-Kasem.(2009):A fuzzy model for evaluation, prediction and control of slurry erosion of ductile materials; Journal of Engineering Sciences, Assiut University, Vol. 37, No. 6, pp.139-146.

4- M.A. Hassan, A. Aboul-Kasem and M. A. EL-Sharief, (2010): Evaluation of the material constants of nitrile butadiene rubbers (NBR) with different carbon black (CB): FE-simulation and experimental; Journal of Engineering Sciences, Assiut University, Vol. 38, No. 1, pp. 119-134.

[1] M. A. Hassan and Abouel-kasem : A Novel Friction Aided Deep Drawing Process for Producing Deep Square Cups, Proceedings of the Eighth International Cairo University MDP Conference, Cairo, January 4-6, 2004, Egypt, Volume II, Pp.961-968. [2] M. A. Hassan : A Fuzzy model for prediction of flow-stress in metal forming, Proceedings of the 3rd Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP3 , Assiut, December 24-26, 2002,Egypt, Vol.2 Pp.411-417. [3] A. Abouel-Kasem and M. A. Hassan : Sliding contact analysis of Viscoelastic cylinders, Proceeding of the eighth international Cairo University MDP conference, Cairo, January 4-6, 2004, Egypt, Pp.101-111. [4]-M. A. Hassan, I. M. Hassaballa, M. A. E. Saleh & M.G. El-Sebaie. (1998): Finite element simulation of OSU friction test, Proc. The Fifth Int Conf. on Production Engineering and design, For Development PEDD5, Ein Shams, April 28-30, 1998, Egypt, Pp.213-226.

I have taught the following subjects for;

Postgraduate level Material models for modeling and simulation of manufacturing processes, Research methodology, Advanced mechanics of materials, Engineering Materials, Micro-Mechanics of Materials, elastic and inelastic behavior of materials, Engineering Plasticity, Finite element analysis for linear and nonlinear problems, Advanced engineering mathematics, Automation and control in manufacturing, Modeling and simulation of dynamic systems, Fuzzy logic modeling for control. Vector and tensor analysis, Introduction to Microelectromechanical systems.

Undergraduate level Fundamental of Materials processing, Engineering Materials, Principles of metal forming, Mechanics of Materials, Mechanical behavior of materials, Die Design, Tool Engineering, , Design of machine elements, experimental Stress analysis, Engineering Drawing, , Advanced manufacturing processes, Fault diagnoses in Mechanical systems. Measurements and Instrumentations, Numerical methods for engineers, Vector Mechanics, Statics & Dynamics, Mechanical Engineering Laboratories.

Seminars

-Seminar on development of forms for Final Year Project (FYP) Evaluation - Seminar on development of Forms for Industrial Training (IT) Course Evaluation - Seminar on development of an on-line student course evaluation system

Workshops and lectures on

 How to prepare course specification according to ABET for under graduate levels.  How to prepare a final course report according to ABET? What is the needed rubric and software? The importance of course evaluation and student feedback for the under graduate students.  How to evaluate the students soft skills  Assessment of Course outcomes & Program outcomes, February 2018.  Faculty Development workshop for EJUST staff member, September 2017.  Workshop on e-learning and quality of education in Malaysia, 2014.  International Workshop on Mechatronics Engineering in Egypt, 2006

Research talks

-Micro forming and micro material models, -Micro fabrication techniques, Microelectromechanical system; -Application of FEM in Heart mechanics simulation, -Application of FEM in analysis of vascular systems, -Excitation propagation in human heart, -A Micro device for measuring the electro-mechanical properties of the heart cell. -Future of SPH in physical simulation of engineering application, -Advanced numerical methods for Mechanics of ceramics and porous material, -Characteristics of Piezoelectric thin films and its applications, -How to write a good research paper -How to write a successful research project.

Published Book

Recent Advances in Materials Science and Engineering, Editor in Chief, Mohsen Abdel-Naeim Hassan, TRANS TECH PUBLICATION, ISBN: 978-3-0357-1354-1, (2018)

Chapter in Book [1] Title: A novel micro device for measuring the electyromechanical properties of a single myocyte Author(s): Hassan MA; Fujiwara N; Kanno I; et al. Editor(s): Laurell T; Nilsson J; Jensen K; et al. Conference: 8th International Conference on Miniaturized Systems for Chemistry and Life Sciences Location: Malmo, SWEDEN Date: SEP 26-30, 2004 Sponsor(s): VINNIVA; Crafoord Fdn; Swedish Fdn Strateg Res; MCPT; Micralyne; SAMSUNG; Micro Plastab; GYROS; Lung Univ; Erysave AB; ATS Med; Silex Microsyst; Johnson &Johnson; Caliper Life Sci; MicroFluid Syst Inc; Analyt Chem; Sci AAAS; Lab Chip; Journal Separat Sci Source: Micro Total Analysis Systems 2004, Vol 1 Book Series: ROYAL SOCIETY OF CHEMISTRY SPECIAL PUBLICATIONS Issue: 296 Pages: 439-441 Published: 2005

[2] Title: Ti-based Ceramic Composite Processing Using Hybrid Centrifugal Thermite Assisted Technique, in Mechanical Properties and Performance of Engineering Ceramics and Composites X, Author(s): Reza Mahmoodian, M.A Hassan, Mohd Hamdi Bin Abd Shukor, DOI: 10.1002/9781119211310.ch5 • In book: Mechanical Properties and Performance of Engineering Ceramics and Composites X, Chapter: 5, Publisher: John Wiley & Sons, Inc., Editors: Dileep Singh Jan 2016. </,p>